TV Series Heat Exchanger
TV Series exchangers condense vapors from low pressure gas streams
typically storage tank reactor vents. The modular TV Series design allows
a standard unit to give a custom fit. Use our
interactive online form to get a fast and accurate quote!
Pressure Housing
Cores are removable through both the front and back sides of the housing
without disassembly of the gas duct. Pressure tests from a full vacuum to 50
PSIG are available.
Housings can be built to contain several cores with separate or shared access panels. The gas connection size and type can easily be changed to match system requirements.
Fin-Tube Core
The fins are rectangular plates with a matrix of die-extruded tube
collars. A sheet metal casing provides rigidity to the fin-tube assembly
prior to tube expansion. After assembly, the tubes are expanded into the
fin collars. This allows for a gap-free connection maximizing heat transfer
and structural integrity.
Installation Considerations
The fluid circuit consists of several parallel tube circuits, which are
joined at inlet and outlet headers. The circuits are designed to work "down
hill" to prevent trapping. To assure complete drainage, optional
intermediate drain headers are available. Attached at the 180deg. return
bends, they provide positive water drainage and protection from freeze-up.
Performance
Xchanger engineers use a computer model to analyze condenser
performance. Complex multiple component vapor/gas mixture processes can be
sized with a high degree of accuracy. As with all Xchanger equipment,
the design performance is guaranteed.
Models
TV-050, TV-075, TV-100, TV-125, TV-150, TV-175, TV-200, TV-225, TV-250, TV-275,
TV-300, TV-325, TV-350, TV-375, TV-400, TV-425, TV-450, TV-475, TV-500,
TV-525, TV-550, TV-575, TV-600, TV-625, TV-650, TV-675 & TV-700.
Special Configurations
Can be see on our
Custom Designs page.
